published date : jan 19, 2008 drawing no : xdsb1753 v1 checked : b .l.liu p.1/5 part number: XZMDKVG70W 3.0x2.5mm surface mount led lamp part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. XZMDKVG70W red ingaalp water clear 70 148 650 green ingaalp 18 44 574 120 features 3.0mmx2.5mm smt led, 1.3mm thickness. bi -color,low power consumption. wide viewing angle. ideal for backlight and indicator. various colors and lens types available. package : 2000pcs / reel. z moisture sensitivity level : level 4. rohs compliant. absolute maximum ratings (t a =25c ) mdk (ingaa lp) vg (ingaalp) unit reverse voltage v r 5 5 v forward current i f 30 30 ma forward current (peak) 1/10duty cycle 0.1ms pulse width i fs 185 150 ma power dissipation p t 75 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 mdk (inga alp) unit forward voltage (typ.) (i f =20ma) v f 1.95 v forward voltage (max.) (i f =20ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emis- sion (typ.) (i f =20ma) p 650 nm wavelength oof dominant emission (typ.) (i f =20ma) d 635 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 28 nm capacitance (typ.) (v f =0v, f=1mhz) c 35 pf operating characteristics (t a =25c ) vg (ingaalp) 2.1 2.5 10 574 570 20 15 notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0. 008") unless otherwise noted. 3.specifications are subject to change without notice.
published date : jan 19, 2008 drawing no : xdsb1753 v1 checked : b .l.liu p.2/5 part number: XZMDKVG70W 3.0x2.5mm surface mount led lamp ? mdk
published date : jan 19, 2008 drawing no : xdsb1753 v1 checked : b .l.liu p.3/5 part number: XZMDKVG70W 3.0x2.5mm surface mount led lamp ? vg
published date : jan 19, 2008 drawing no : xdsb1753 v1 checked : b .l.liu p.4/5 part number: XZMDKVG70W 3.0x2.5mm surface mount led lamp remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters. ? tape specification (units : mm) ? recommended soldering pattern (units : mm; tolerance: 0.1) ? the device has a single mounting surface. the device must be mounted according to the specifications.
published date : jan 19, 2008 drawing no : xdsb1753 v1 checked : b .l.liu p.5/5 part number: XZMDKVG70W 3.0x2.5mm surface mount led lamp packing & label specifications XZMDKVG70W
|
